Category: Electrical Info

  • Solar Electrical Experiments

    5 random experiments with solar electric energy, ranging from charging smartphones and making hydrogen powered bottle rockets, to sparking plasma arcs and even starting a fire.

    Solar panels provided by Verengo Solar: http://bit.ly/IBVerengoSolar
    Watch for a giveaway video coming on November 14th where I’ll give 3 panels away to 3 of you!

    For more project videos, check out http://www.thekingofrandom.com

    WARNING: These experiments and results are portrayals of my own attempts and experiences, and are accurate to the best of my knowledge. Your results may vary depending on your location, experience, and modifications to project ideas. There are risks associated with some of these projects that require adult supervision, and possibly others that I’m not aware of. Use of this video content is at your own risk.

    Music by Scott & Brendo (“Kitten Air” – Instrumental)
    http://bit.ly/ScottBrendoiTunes

    Project inspired by: Comments on a previous video (http://bit.ly/WaterFuelConverter ) suggesting I try the gas generation with renewable energy.

    About this project:

    Verengo Solar (http://bit.ly/IBVerengoSolar) sent me some solar panels so I could get my feet wet with using energy from the sun. I tried a bunch of experiments, which you’ll see in the project video. One of my favorites was hooking up my hydrogen generator, from a previous project, and generating this “earth friendly” fuel with renewable energy.

    I’ve always wanted to hook my hydrogen generator to solar panels and see what happened, so that was the first order of business 🙂

    I expected that gas production would be low, but was surprised to even get around 1 liter every 5 minutes. Imagine if you ran the generator all day. You could collect copious amounts of the fuel and it wouldn’t cost a penny. Perhaps 100 liters for 8 hours of sunlight? That blows my mind .. and my ear drums.

    The fuel is made by electrically splitting water into hydrogen and oxygen gasses (2H20 = 2H2 + O2)

    This gas is perfectly balanced for a powerful reaction, and when ignited, turns back into water. There are no by-products that are harmful to the environment. The process can be repeated over and over, and the gas is very powerful.

    Rather than using a charge controller to charge a battery bank, I wanted to see if I could hook the panels directly to a cheap inverter to power devices on the fly. It seemed work just fine for charging my phone, but I did have to hook the inverter to a car battery to get it to power anything more substantial, like the battery charger for my cordless drill.

    It really surprised me to see the juicy electrical arcs between the terminals. I wasn’t expecting to see a sustained plasma arc just from 2 panels in parallel. I’m still not exactly sure how it did that with such low voltage, but it was really cool to witness.

    Overall, I’m a lot more interested in solar power now that I’ve been able to play with it a bit. I can see the value in it, and now that my feet are wet, I’m a lot less apprehensive about getting deeper into it in future projects.

  • SolidWorks Electrical – Connectors and Cable Design

    In this live webcast, we will cover the detailed cabling that SolidWorks Electrical automates as well as dealing with wire and cable that terminate at standard connectors like MIL 38999 Series connectors as well as headers connecting to circuit boards.

  • Father & Son Car Audio Install – GMC Yukon – Electrical Upgrades Big 3 Wiring – Video #4

    See all the pics/progress here: http://www.stevemeadedesigns.com/board/topic/192946-father-son-project-02-yukon-a-rockford-fosgate-sound-system-install-new-battery-big-3-wiring-etc-11414-ubl-all-pics-no-chat/

    Rockford Fosgate/SMD Products etc available here: http://www.wcCarAudio.com

    It’s not always the power…it’s the delivery. If you can’t deliver it than it cannot be used. Today we did a fresh XS Power D3400 Battery (and side post adapters) along with some new 1/0 cable. We did the Big three wiring upgrade. What is the big 3? watch the video and see.

    Next video the door speakers, amp wiring and finally getting to play it!

    Planned equipment so far:

    (1) Sony CD / Bluetooth H.U.
    (1) Rockford Fosgate P1000.1 (on Lows)
    (1) Rockford Fosgate P300.2 (on Highs)
    (2) Rockford Fosgate P3 12″ Subwoofers
    (1) Set Rockford Fosgate Power T1652-s
    more possibly? subject to change of course!

    Also, check out my other pages:

    Instagram: http://www.instagram.com/meade916

    Facebook Page here:
    http://www.facebook.com/pages/Steve-Meade-Designs/59127968198

    Follow: http://www.twitter.com/meade916

  • U2 – Electrical Storm (Excellent Quality)

    Just U2’s Electrical Storm coupled with some sweet pics

  • How to Prepare for an Electrical Exam

    Visit http://www.MikeHolt.com/examprep to explore our product catalog.
    Mike Holt Enterprises offers comprehensive electrical exam prep materials delivered in a logical, easy to understand format that helps build a solid understanding of electrical concepts, calculations, and code material.

  • U2 – Electrical Storm (William Orbit Mix)

    Song from their album “Best of 1990-2000”

  • TOKYO DISNEYLAND ELECTRICAL PARADE DREAM LIGHT 2013

    東京ディズニーランドエレクトリカルパレードドリームライツ2013

  • After Effects: Electrical Text Reveal Tutorial

    More Info: http://creativedojo.net/tutorial/electrical-text-reveal/

    In this tutorial, we’ll learn how to create a very slick electrical/lightning text reveal effect right within After Effects using mostly built-in effects.

    Special thanks to our friendly sponsors from Squarespace. For a free trial and 10% off, visit http://www.squarespace.com/dojo and use the promo code: DOJO

    Website: http://www.creativedojo.net
    Twitter: http://www.twitter.com/creativedojo
    Facebook: http://www.facebook.com/creativedojo
    Instagram: http://www.instagram.com/vinhsonnguyen

    If you have any questions or feedback, leave them down below in the comments!

  • SolidWorks Electrical Getting Started

    This DDi CADcast covers the basics needed to get started with SolidWorks Electrical. Topics include creating a project, single and multi-line drawings and inserting schematic symbols.